300±10% KWp Solar Rooftop Power Pla

300±10% KWp Solar Rooftop Power Plant to be installed at Angus works
Scope of work: Scope of Supply & Work includes all, design, engineering, manufacture, procurement & supply of equipment, and materials, testing at manufacturers works, inspection, packing and forwarding, supply, unloading at site, associated civil works, services, permits, installation and incidentals, insurance at all stages, erection, testing and commissioning of 300±10% KWp Grid Interactive Solar PV Power Plant with associated equipments and materials on turnkey basis at Angus works.

A. The equipment and materials for 300±10% KWp Grid Interactive Solar PV Power Plant with associated system (Typical) shall include but not be limited to the Supply, Erection, and Testing & Commissioning of the following:

a) Solar PV modules in array including mounting frames, structures, foundation bolts & nuts for holding structures (grouting on terrace), earthing grid design and module inter-connection.
b) All System Junction boxes, fuse boxes, distribution boxes, MCBs, surge arrestors.
c) Power Conditioning Units (PCU) with SCADA monitoring.
d) LT Power interfacing panel, Plant monitoring desk, DC distribution Board.
e) Digital voltmeter & ammeter, KWh meters, Metering instrument, Protection relays along with battery panel.
f) LT Power & control cables including terminations & other accessories required for both AC & DC power.
g) Data acquisition system with remote monitoring facilities.
h) Lightning arrestors, PVC pipes & accessories / trenches.
i) Trivector meter with Main & check meter.
j) Metering set & Protection or isolation systems.
k) Power and Control Cables.
l) Earthing system for PV Array, DC power system, lightning protection system.
m) Transportation, unloading and loading, storage of all equipment at Site.
n) Erection, testing & commissioning of all supplied materials.
o) Project Management including adherence to all requisite safety practices.
p) Fire extinguishers, name plates, danger boards etc.
q) Training of technicians / executives.
r) Control room equipment related to solar system, mandatory spares for 20 years operation.
s) Any other material / equipment required to complete the project.

t) Design of 300±10% kWp Grid Interactive Solar Power Plant with Higher generation unit and lower generation cost will have to be achieved. The associated electrical & mechanical auxiliary systems includes preparation of single line diagrams and installation drawings, electrical lay outs, erection key diagrams, electrical and physical clearance diagrams, design calculations for Earth- mat, Bus Bar & Spacers indoor and lighting/illumination etc. design memorandum and other relevant drawings and documents required for engineering of all facilities within the area to be provided under this contract, are

結果 (繁體中文) 2:

300±10％KWP太陽能屋頂電站在安格斯安裝工程
工作範圍：供應及工作範圍包括所有的設計，工程，製造，採購和設備供應，材料，測試在生產商合作，檢驗，包裝和轉發，供，卸貨現場，相關土建工程，服務，許可證，安裝和雜費，保險的所有階段，勃起，300±10％KWP網互動太陽能光伏電站與交鑰匙相關設備和材料測試和試運行在基地工作的安格斯。A. 關聯系統（典型值）為300±10％KWP網互動太陽能光伏電站的設備和材料應包括但不限於供應，安裝，測試及以下的調試：一）太陽能光伏組件陣列中包括安裝框架，結構，基礎螺栓和螺母持有結構（在陽台灌漿），接地網的設計和模塊間連接。b）所有系統接線盒，保險絲盒，配電箱，微型斷路器，避雷器。C）功率調節單元（PCU）與SCADA監控。D）LT電源接口面板，工廠監控台，直流配電板。E）數字電壓表和電流表，電度表，計量儀器，帶電池板，沿保護繼電器六）長線電源和控制電纜含所需終端和其他配件交流和直流電源。G）數據採集系統，遠程監控設施，高）避雷器，PVC管材及配件/戰壕。I）Trivector儀具有主，並檢查儀表。j）條計量套和保護或隔離系統。k）的電源和控制電纜。l），實現光伏陣列，直流電源系統，防雷系統，接地系統米）交通運輸，卸載和加載，所有設備的存儲在現場。n）的架設，測試和調試所有提供的材料。O）項目管理，包括遵守所有必要的安全措施。p）滅火器，名牌等危險板q）。培訓技術人員/主管R）控制室設備與太陽系，20強制性備件多年的經營，S）來完成該項目。所需的任何其他材料/設備t）能夠以更高世代單元和更低的發電成本300±10％kWp的電網互動的太陽能發電廠設計將得以實現。相關的電氣和機械輔助系統包括準備單線圖和安裝圖，電氣躺在出局，勃起關鍵圖，電氣原理圖和物理清除，設計計算的地基墊，母線及墊片室內照明/照明等。區域內的所有設施工程的要求組織章程大綱及其他相關設計圖紙和文件，以本合同項下提供，是